600-2
Specifications: | |
|---|---|
Model Number | 600-2 |
Motor Horse Power | 7,5 HP (maximum) |
Spindle Speeds | 800 RPM (maximum) |
Unit Stroke | 230 RPM Max |
Capacity | Steel: 1 1/2" - 11 1/2 |
Threads Per Inch | Minimum: 6 |
Spindle Noses Standard | Head Drive, 1-3/8 ID |
Standard Features
The Model 600-2 is our heavy duty tap unit with six inches of lead screw stroke and no rapid advance or rapid return. The unit comes standard with either 1-3/8 or head drive spindle. Also, as a standard feature, this unit incorporates a 2:1 reduction gear drive to allow lower spindle RPM. The unit is equipped with a hardened and ground lead screw running in a bronze nut. Both members can be removed and replaced for service or when changing from one pitch thread to another. The stroke is controlled by means of two standard limit switches. Offered as optional are four (4) switches with two being used as safety contingency switches. When using the unit with a multiple spindle head, the head must be supported on guide bars, and if used in a vertical position, must be counterweighted. The unit comes complete with motor mounting bracket, sheaves, vee belts and enclosed belt guard.
print