German
Brazil
English
Russian
Chinese

    HORIZONTAL TURNING CENTERS

    The C series demonstrates its superiority where high cutting performance and the utmost accuracy is called for. Whether the workpiece concerned has just to be turned or has also to be bored or milled, whether only bar work or only chuck work is involved, the machines in the VDF C series offer all the equipment needed for a wide workpiece spectrum, to:

    • Reduce machining times
    • Improve quality
    • Lower costs
    • Appreciably increase productivity

     

     

    Technical Data

    		    
        VDF 250 C
    Operating range Swing diameter over bed max. mm 550 / 520
    Machining diameter, longitudinal max. mm 480
    Turning lengths mm 1000–3000
    Cross stroke mm 405
    Main spindle Spindle nose, acc. to DIN 55026 Size 8
    Chuck ø mm 250 / 315
    Spindle bore mm 103
    Spindle ø at front bearing mm 150
    Tailstock Quill ø mm 100
    Quill stroke mm 100
    Quill axial force adjustable max. kN 14
    Main drive AC motor, 100/50 % duty cycle kW 37 / 53
    Speed range rpm 30–3000
    Turning torque, 100/50 % duty cycle max. Nm 525 / 750
    Cutting power kN 12,5
    Feed drives Feed speed mm/min. 0,1–10000
    Rapid traversing speed m/min. 10
    Feed force when drilling kN 15
    Tool turret Drum turret with directional logic   x
    Number of tool stations 12
    of which 6 are cyl. shank location 69 880 (ø mm) Size 25 (ø 50)
    Indexing time for 1/6 tool stations s 0,9 / 1,8
    Repeatability deg 0,0005


    		     
        VDF 315 C VDF 400 C
    Operating range Swing diameter over bed max. mm 550 / 520 785 / 750
    Machining diameter, longitudinal max. mm 480 700
    Turning lengths mm 1000–3000 1000–3000
    Cross stroke mm 405 620
    Main spindle Spindle nose, acc. to DIN 55026 Size 11 15
    Chuck ø mm 315 / 400 400 / 630
    Spindle bore mm 103 132
    Spindle ø at front bearing mm 150 190
    Tailstock Quill ø mm 100 130
    Quill stroke mm 100 120
    Quill axial force adjustable max. kN 14 25
    Main drive AC motor, 100/50 % duty cycle kW 37 / 53 52 / 65
    Speed range rpm 7–3000 7–2000
    Turning torque, 100/50 % duty cycle max. Nm 2250 / 3270 3300 / 4100
    Cutting power kN 12,5 25
    Feed drives Feed speed mm/min. 0,1–10000 0,1–10000
    Rapid traversing speed m/min. 10 10
    Feed force when drilling kN 15 20
    Tool turret Drum turret with directional logic   x x
    Number of tool stations 12 12
    of which 6 are cyl. shank location 69 880 (ø mm) Size 25 (ø 50) Size 32 (ø 60)
    Indexing time for 1/6 tool stations s 0,9 / 1,8 1,2 / 2,0
    Repeatability deg 0,0005 0,0005

    Applications

    • Hard machining in place of grinding
    • Maximum depths of cut
    • Machining heavy workpieces
    • Milling, boring, rolling and turnturn broaching are among the abilities of these machines that result in immediate economies

    Contact sales representative

    Bernhard Dorm
    Tel.: +49 7161 201 375
    email: Bernhard.Dorm(at)mag-ias.com

    Sandra Dankelmann
    Tel.: +49 7161 201 638
    email: Sandra.Dankelmann(at)mag-ias.com
    ID:845