CNC CENTER FOR FACING AND CENTRING
Advantages
- VDF 450 FC, VDF 450 T und VDF 450 TM are modular variations of the same platform model
- Machine is ideally suited for facing and centering operations on railway axles
- Facing (cross milling / circular milling) and centering of shafts including drilling, tapping and box turning of clamping diameters
- Hydropol machine bed for high mechanical and thermal stability
- Highest standards in tolerances and surface finish
- Automatic loading and unloading is facilitated by good accessibility from the top or the front of the machines
- Graphically supported start up “Look and do”
End machining
The facing and centering machines of the VDF 450 FC series allow operations
like facing (cross milling / circular milling) and centering of shafts including
drilling, tapping and box turning of clamping diameters:
Technical Data |
|
|
| |
|
|
| Width x height |
mm |
2480 / 2860 |
| Length |
mm |
5100 / 5800 / 6800 / 8300 |
| Weight net. |
t |
23,5 / 25,5 / 28,5 / 32 |
| Noise level without machining |
dB(A) |
75 |
| |
|
|
| Capacity (end machining) |
|
|
| Working piece diameter max. |
mm |
200 |
| Working piece length max. |
mm |
1100 / 1800 / 2800 / 4300 |
| |
|
|
| NC slides (X/Y/Z axis) |
|
|
| X-travel |
mm |
265 / 215 |
| Y-travel |
mm |
±75 |
| Z-travel |
mm |
1300 / 2050 / 3050 / 4300 |
| Feed force (100 / 25%) |
kN |
10 / 18 |
| Rapid traverse (X-/Y-/Z-axis) |
m/min. |
15 / 15 / 30 |
|
|
|
|
| Turret (B-axis) |
|
|
|
| Turret |
|
Disk turret axial |
Crown turret axial |
| Tool adaptor system |
size |
Capto C5 |
HSK 63 |
| Turret positions upper/lower |
no. |
8 |
6 |
| Turret swing diameter |
mm |
620 |
720 |
| Power driven tools (100 / 25%) |
kW |
6 |
20 |
| Power driven tools (100 / 25%) |
Nm |
60 |
200 |
| Speed range |
rpm |
20–3500 |
20–4000 |
| |
|
|
|
| Clamping system (Hico) |
|
|
|
| Clamping range |
mm |
|
60 |
| Clamping force |
kN |
|
15 / unit |
Bernhard Dorm
Tel.: +49 7161 201 375
email: Bernhard.Dorm(at)mag-ias.com
Sandra Dankelmann
Tel.: +49 7161 201 638
email: Sandra.Dankelmann(at)mag-ias.com
