Technical Data |
|
|
|
|
| Machine height x width (w/o panel) |
mm |
2860 x 2480 |
|
|
| Length (with 1 magazine) Turning length 2m / 3m / 4.5m |
mm |
8000 / 9000 / 10500 |
|
|
| Spindle height above ground |
mm |
1350 |
|
|
| Weight net. Turning length 2m / 3m / 4.5m |
t |
25,5 / 28,5 / 32 |
|
|
| Turning length |
mm |
2000 / 3000 / 4500 |
|
|
| Turning diameter |
mm |
600 |
|
|
| Swing diameter over bed |
mm |
700 |
|
|
| X travel |
mm |
725 |
|
|
| Y travel |
mm |
300 (Optional: 460) |
|
|
| B-Axis |
|
Size 1 |
Size 2 |
| Swivelling range |
deg |
±105 |
±105 |
| mechanical index of B-Axis |
deg |
5 |
5 |
| Swivelling torque |
Nm |
1300 |
2400 |
| Max. tangential torque (locked-up B-Axis) |
Nm |
3600 |
7200 |
| |
|
|
|
| Boring-Milling Unit |
|
|
|
| Tool system |
|
HSK 63 / Capto C6 |
HSK 100 / Capto C8 HSK 63 / Capto C6 |
| Feed rate Z-, X-, Y-Axis 100% ED |
N |
1500 |
1500 |
| Power 100% / 40% ED |
kW |
36 / 48 |
28,3 / 36 |
| Torque 100% / 40% ED |
Nm |
100 / 128 |
300 / 380 |
| Nominal speed |
rpm |
3500 |
900 |
| Speed max. |
rpm |
7000 |
5500 |
| Coolant pressure max. |
bar |
80 |
80 |
| |
|
|
|
| Tool magazine |
|
|
|
| Number of tools |
|
|
32 / 64 / 96 (HSK 100 / Capto C8) 40 / 80 / 120 (HSK 63 / Capto C6) |
| Standard tool diameter |
mm |
|
100 |
| Tool diameter max. |
mm |
|
150 |
| Tool length max. |
mm |
|
500 |
| Tool weight max. |
kg |
|
15 |
| |
|
|
|
| Boring bar magazine |
|
|
|
| Number of tools |
|
|
3 |
| Tool diameter max. |
mm |
|
100 |
| Tool length min. |
mm |
|
350 |
| Tool length max. |
mm |
|
600 |
| |
|
|
Gear Spindle |
Gear Spindle |
| Main Spindle |
|
Motor Spindle |
Size 1 |
Size 2 |
| Gear steps |
|
0 |
2 |
2 |
| Nominal power (100%) |
kW |
95 |
37 |
60 |
| Power max. (40%) |
kW |
102 |
56 |
72 |
| Nominal torque (100%) |
Nm |
800 |
2283 / 542 |
4450 / 1050 |
| Torque max. (40%) |
Nm |
1050 |
3486 / 581 |
5340 / 1270 |
| Speed max. |
rpm |
3100 |
670 / 2800 |
510 / 2165 |
| Spindle nose |
Size |
A8 |
A11 |
A11 |
| Spindle bore |
mm |
100 |
103 |
103 |
| Spindle front bearing diameter |
mm |
150 |
150 |
150 |
| |
|
|
|
|
| Turret |
|
|
radial |
axial |
| Gear steps |
|
|
- |
2 |
| Tool adapter system max. |
size |
|
VDI 50 radial |
VDI 50 axial |
| Turret positions / powered |
no. |
|
12 / 12 |
12 / 6 |
| Power driven tools max. |
kW |
|
15 |
13 |
| Torque driven tools max. |
Nm |
|
68 |
100 / 32 |
| Speed max. |
rpm |
|
3000 |
920 / 3000 |
| Slide position |
mm |
|
top right/left, bottom right |
top right |
| Option Y-axis |
mm |
|
±75 |
±75 |
Bernhard Dorm
Tel.: +49 7161 201 375
email: Bernhard.Dorm(at)mag-ias.com
Sandra Dankelmann
Tel.: +49 7161 201 638
email: Sandra.Dankelmann(at)mag-ias.com
