German
Brazil
English
Russian
Chinese
11 12 14

HORIZONTAL TURN-MILL CENTERS

Advantages

  • Hydropol machine bed for high mechanical and thermal stability
  • X-Hub up to 725 mm / Y-Hub up to 460 mm
  • High torque gear spindle (max. 5340 Nm)
  • Optional lower turret
  • Upper slide with B-axis and high performance milling spindle (max. 380 Nm)
  • Also available: Turret with axial tool adapter system for higher stiffness
  • Graphically supported start up (“Look and do”)

Technical Data

        
Machine height x width (w/o panel) mm 2860 x 2480    
Length (with 1 magazine) Turning length 2m / 3m / 4.5m mm 8000 / 9000 / 10500    
Spindle height above ground mm 1350    
Weight net. Turning length 2m / 3m / 4.5m t 25,5 / 28,5 / 32    
Turning length mm 2000 / 3000 / 4500    
Turning diameter mm 600    
Swing diameter over bed mm 700    
X travel mm 725    
Y travel mm 300 (Optional: 460)    
B-Axis   Size 1 Size 2
Swivelling range deg ±105 ±105
mechanical index of B-Axis deg 5 5
Swivelling torque Nm 1300 2400
Max. tangential torque (locked-up B-Axis) Nm 3600 7200
       
Boring-Milling Unit      
Tool system   HSK 63 / Capto C6 HSK 100 / Capto C8 HSK 63 / Capto C6
Feed rate Z-, X-, Y-Axis 100% ED N 1500 1500
Power 100% / 40% ED kW 36 / 48 28,3 / 36
Torque 100% / 40% ED Nm 100 / 128 300 / 380
Nominal speed rpm 3500 900
Speed max. rpm 7000 5500
Coolant pressure max. bar 80 80
       
Tool magazine      
Number of tools     32 / 64 / 96 (HSK 100 / Capto C8) 40 / 80 / 120 (HSK 63 / Capto C6)
Standard tool diameter mm   100
Tool diameter max. mm   150
Tool length max. mm   500
Tool weight max. kg   15
       
Boring bar magazine      
Number of tools     3
Tool diameter max. mm   100
Tool length min. mm   350
Tool length max. mm   600
      Gear Spindle Gear Spindle
Main Spindle   Motor Spindle Size 1 Size 2
Gear steps   0 2 2
Nominal power (100%) kW 95 37 60
Power max. (40%) kW 102 56 72
Nominal torque (100%) Nm 800 2283 / 542 4450 / 1050
Torque max. (40%) Nm 1050 3486 / 581 5340 / 1270
Speed max. rpm 3100 670 / 2800 510 / 2165
Spindle nose Size A8 A11 A11
Spindle bore mm 100 103 103
Spindle front bearing diameter mm 150 150 150
         
Turret     radial axial
Gear steps     - 2
Tool adapter system max. size   VDI 50 radial VDI 50 axial
Turret positions / powered no.   12 / 12 12 / 6
Power driven tools max. kW   15 13
Torque driven tools max. Nm   68 100 / 32
Speed max. rpm   3000 920 / 3000
Slide position mm   top right/left, bottom right top right
Option Y-axis mm   ±75 ±75

Contact sales representative

Bernhard Dorm
Tel.: +49 7161 201 375
email: Bernhard.Dorm(at)mag-ias.com

Sandra Dankelmann
Tel.: +49 7161 201 638
email: Sandra.Dankelmann(at)mag-ias.com
ID:626